Description
Swing-type door for freeze chambers
- For freeze chambers with a temperature range from 0°C to -25°C.
Standard configuration:
- Door frame made of anodized aluminum profile with a thickness of 2 mm;
- Door leaf is made of 0.45 mm galvanized steel with a white polymer coating (Ral 9003) in a protective film;
- Thermal insulation material is polyurethane foam with a density of 43 kg/m3;
- Frost-resistant rubber seal;
- Heating the perimeter of the door against freezing. The heater is located in a special channel in a rubber seal along the door contour;
- Handle-lock with a key, equipped with an emergency opening mechanism from the inside;
- Hinges with the function of door lifting when opening;
- Door frame;
● Mounting kit, decorative plugs covering the holes of the door frame mounting points.
| Door code | Temperature range (°C) | Standard dimensions | Thickness (mm) | Heat conduction coefficient, W/ (m*K) | |
| Width (m) | Height (m) | ||||
| SwDL ( Swing-type door for low-temperature chamber) | The lowest is -25°C | From 0.8 to 1.5 | From 1.8 to 2.5 | 92 | 3.68 |
