Description
Sliding-type door for freeze chambers
- For refrigerator chambers with a temperature range from -25°C to -35°C.
Standard configuration:
- Door frame made of anodized aluminum profile with a thickness of 2 mm;
- Door leaf is made of 0.45 mm galvanized steel with a white polymer coating (Ral 9003) in a protective film;
- Thermal insulation material is polyurethane foam with a density of 43 kg/m3;
- Frost-resistant rubber seal – 2nd circuit;
- Guiding rails – upper, lower (on the wall).
- Heating the perimeter of the door against freezing. The heater is located in a special channel in a rubber seal along the contour of the door frame;
- Key lock equipped with an emergency opening mechanism from the inside;
- Lever handle or pull handle;
- Door frame;
- Mounting kit, decorative plugs covering the holes of the door frame mounting points.
| Door code | Temperature range (°C) | Standard dimensions | Thickness (mm) | Heat conduction coefficient, W/ (m*K) | |
| Width (m) | Height (m) | ||||
| SlDE (sliding-type door for extreme freezing chamber) | The lowest is -35°C | From 0.8 to 2 | From 1.8 to 2.5 | 120 | 4.80 |
