Single-leaf sliding-type door for low-temperature chamber

    Check with the manager

    Description

    Sliding-type door for freeze chambers

    • For refrigerator chambers with a temperature range from -25°C to -35°C.

     Standard configuration:

    • Door frame made of anodized plastic profile with a thickness of 2 mm;
    • Door leaf is made of 0.45 mm galvanized steel with a white polymer coating (Ral 9003) in a protective film;
    • Thermal insulation material is polyurethane foam with a density of 43 kg/m3;
    • Frost-resistant rubber seal – 2nd circuit;
    • Guiding rails – upper, lower (on the wall).
    • Heating the perimeter of the door against freezing. The heater is located in a special channel in a rubber seal along the contour of the door frame;
    • Key lock equipped with an emergency opening mechanism from the inside;
    • Lever handle or pull handle;
    • Door frame;
    • Mounting kit, decorative plugs covering the holes of the door frame mounting points.
    Door code Temperature range (°C) Standard dimensions Thickness (mm) Heat conduction coefficient, W/ (m*K)
    Width (m) Height (m)
    SlDE (sliding-type door for extreme freezing chamber) The lowest is -35°C From 0.8 to 1.2 From 1.8 to 2.1 120 4.80